Silicon carbide degreasing sintering furnace is mainly used for degreasing and sintering treatment of powder forming silicon carbide products. The equipment adopts advanced automatic control and human-computer interaction system, precise control of temperature, pressure, flow and other variables, so that the product quality has been significantly improved.

Product Introduction

Silicon carbide degreasing sintering furnace is mainly used for degreasing and sintering treatment of powder forming silicon carbide products. The equipment adopts advanced automatic control and human-computer interaction system, precise control of temperature, pressure, flow and other variables, so that the product quality has been significantly improved.

Product parameters
Loading space (D*H) Phi 400 * 1200mm (Customizable)
Phi 500 * 1800mm (Customizable)
Maximum operating temperature 2350 °C
Limit vacuum 1 Pa
Vacuum leakage rate ≤5×10?3 mbarl/s
Vacuum pump set Rotary vane pump + Roots pump
Rate of dewaxing 98% or higher
Rate of pumping ≤20min
Heating rate (full load, < 1000 °C) ≤10 °C/min
Heating rate (full load, ≥1000 °C) ≤6 °C/min
Temperature uniformity in the low temperature section + / - 5 °C or less
Temperature uniformity in the high temperature section Plus or minus 4 °C or less
Temperature measurement mode Wre5-26 double core thermocouple + infrared thermometer
Number of heating zones Zone 3 / Zone 4
Type of process gas Ar, N2
Power supply Three-phase five-wire system AC380V±10%/50HZ
The above parameters can be adjusted according to the process requirements and are not regarded as the basis for acceptance. The specific technical scheme and agreement shall prevail.
  • Telephone Consultation0731-28837588
  • QQ Consultation
  • WeChat Consultation